for Datsun Roadsters: BRE Le Mans style wheel w/BRE wheel cap $ 221

Select Le Mans-style Wheel Size: 15" x 6" w/ 3mm offset 15" x 6" w/ 24mm offset + $4: 15" x 7" w/0 offset +$4: 15" x 7" w/18mm offset Valve Stems?: Yes - include a valve stem for each wheel at no charge No thanks - I don't need valve stems Select Lug Nut Type and Size: Select lug nuts here Acorn style 7/16 x 20 17mm Acorn style 1/2 x 20 17mm Acorn style 12mm x 1.25 17mm Acorn style 12mm x 1.5 17mm Acorn style 14mm x 1.5 17mm Acorn style 7/16" x 20 3/4" Acorn style 1/2" x 20 3/4" Acorn style 12mm x 1.25 3.4" Acorn style 12mm x 1.5 3/4" Acorn style 14mm x 1.5 3/4" OE style 7/16 x 20 17mm OE style 1/20 x 20 17mm OE style 12mm x 1.25 17mm OE style 12mm x 1.5 17mm OE style 14mm x 1.5 17mm OE style 7/16" x 20 3/4" OE style 1/2" x 20 3/4" OE style 12mm x 1.25 3/4" OE style 12mm x 1.5 3/4" OE style 14mm x 1.5 3/4" No thanks. I don't need any lug nuts

Quantity:

Note:  These wheels are machined to order for Roadsters.  Please allow at least 2 weeks for that to be done. Shipping Info first so you don't miss this: Once we receive your order we will contact you with the shipping cost and will take your payment for shipping at that time.  The BRE Datsun 2000 Roadsters and 240Zs ran with American Racing Le Mans magnesium wheels. We have partnered with VTO Wheels to have a Le Mans-style wheel made so you can replicate the look of the original BRE Datsuns.  Wheel Construction/Color: The original American Racing wheels were poured magnesium which resulted in a porous and rough surface. The centers were then left bare (a dark gray) and the rims were machined/polished. The wheels we are offering here are low-pressure injected aluminum which makes them stronger than the original mags and makes the finish less porous/rough than the original mags. On the new wheels, the rims are again machined/polished.  Then to make the centers have the same look as the original mags we used, they are painted in a dark gray (which you'll see referred to as "BRE gray") and then coated to ensure longevity of the finish.  BRE Wheel Caps: All wheels come with BRE logo'd center wheel caps free of charge.  Valve Stems: We reviewed a variety of valve stems that are available for these wheels. We found the standard straight valve stem is still the best fitting and quality solution so that’s what we provide, free of charge, with each wheel.  Sizes, Weights, Offsets: Bolt pattern: All wheels offered here have the standard Datsun 114.3 four bolt pattern. Sizes: Sizes and available offsets vary often based on current inventory. Due to this you'll first choose your preferred wheel style and color and then the system will show the available sizes. If you don't see the size you need you might check what's available in a different color. Weight: Often, manufacturers do not provide weight information. As we have not had every size of wheel in our possession, we don’t have weight information for all wheel sizes. A rough average however is about 14 pounds per wheel. Offset: If you are not sure what offset is correct for your car, contact us and we can provide you a schematic to use to determine what’s best. Quality: These wheels are built to the current JWL/VIA quality industry standards. Hundreds of wheels built to these standards are used in club racing. If we had to choose between driving on these wheels or on a 40 year-old set of American Racing magnesium wheels, we’d choose these modern wheels. With that said, we want to emphasize, these wheels are not specifically designed to be race wheels. Their main purpose is to provide you a wheel that looks similar to what the BRE Datsuns ran with at a reasonable cost.  Wheels that are specifically built for racing cost in excess of $1000 each (these wheels are less than $200 each). You can use impact wrenches on race wheels without risk of damage (which you shouldn’t do with these) but even race wheels can break if you run into things. We offer race specific wheels for Daytona Coupe’s and they can also be built for your car if that’s the way you prefer to go. They cost approximately $1000/wheel and they won’t look like the Libre and Le Mans wheels.  Warranty/Care info: Please find these details at the red tab marked "Warranty/Care Info" in the column to the left.  With all that said, we trust you will like and enjoy having these wheels on your Datsun!